Suction
api road

Insertables
mechanical pumps

Insertable
progressive cavity pumps

Surface
transfer pumps

Products > Subsurface Equipment

Products > Subsurface Equipment

Products > Subsurface Equipment

Products > Subsurface Equipment

Products > Subsurface Equipment

Geoteco has transfer pumps, whose function is the feeding system, which continuously sends fuel to the injection pump to regulate the engine speed.


We produce all sizes of suction roads (standard rods, coupling rods, polished, etc.) in degrees D. HL, etc.


Specifications:


  • The rod has a high mechanical strength and good performance.
  • The yarn is manufactures by special cold extrusion molding to achieve high precision and longer life.

The pumping rod can be assembled and connected to the lower end of the pumping rod in the plant, inside the oil well like a unit and tight to the pipe by seating nipples pre-installed in the pipe as in the pipe at depth.


The reconditioning operation time for a pumping rod is much less than pumping line of a well approximately 50%. The pumping rod has 3 types.

Progressive Cavity Pumps (rotor and stator) the main feature is their assembly inside the casing. Thus the pump is not connected to the production line, but is assembled inside the pump.


Applications:


  • Oil wells with low fluid; the cost of intervention makes the use of an normal pump high.
  • Oil wells with high frequency of interventions (regardless of flow) Flow range 1.3 to 491 bpd @100rpm
  • Pump with sensors at the bottom of the well.

Advantages:


  • Minimizes intervention time
  • Minimizes risk costs in the labor service, this is reflected in less losses in production.
  • Replacing the pump without removing it from the pipe.
  • 60% saving on pump replacement.
  • Is not necessary remove sensors from the bottom of the well or cable.

Geoteco has transfer pumps, whose function is the feeding system, which continuously sends fuel to the injection pump to regulate the engine speed.